Anycubic High Speed Resin 1kg
السعر الأصلي هو: EGP3,700.00.جنيه3,100.00السعر الحالي هو: EGP3,100.00.
● Print Up To 3X Faster
● Sturdy & Strong, Ensure Model Details
● Speedy & Stable, Clean At Ease
المتوفر في المخزون 2 فقط
- جميع طرق الدفع
- شراء أمن
- الدفع عند الاستلام
- عروض توصيل مجاني
Anycubic High Speed Resin 1kg
Instructions for Use
(1) Before use:
Shake the liquid resin before use;
Clean the resin tank and the molding platform to keep the bottom of the resin tank in light
transmission.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements;
Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal
pliers,tweezers,containers,gloves;
ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade;
B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken
out and drained; Anycubic Wash and Cure machines are suggested to ensure better effect.
C.Proper processing, such as removing support, polishing, coloring, etc.
Precautions
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light
to avoid high temperature or sunlight. - Suggested operating temperature is 18-35’c, and a low temperature may affect the printing effect, thus, the
resin can be properly preheated before use (not more than 60°C). - If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the
light source after curing.Therefore, the following steps are recommended:
(1) The intensity of mercury lamp or LeD light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury
lamps is prohibited.
(4) lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive
material.
| العلامة التجارية |
Anycubic |
|---|
Anycubic Photon M3 3D Printer
إنتهى من المخزن
طابعة ثلاثية الأبعاد 5015 منفاخ تربو شعاعي 12 فولت تيار مستمر
In stock
eResin-eLastic 0.5 kg
In stock
غطاء جوارب من السيليكون لـ E3D V6 Extruder Hotend
In stock
منتجات ذات صله
GT2 Timing pulley with 20 Teeth
In stock
تشغيل/إيقاف التبديل 2 دبوس-SW2
In stock
power supply 12 Volt 30 Ampere
In stock
تقييمات
Clear filtersلا توجد تقييمات بعد.